MDPE Elbow Male Threaded Fitting

Elbow 90 Male Thread

Available in sizes 20 – 90mm

Manufactured from high-quality materials

UK REG4 Compliant

Fully Recyclable

Eco friendly complying with LEED standard

Pressure rated to 16 bar

Operating Temperature: 20°C @ 16 bar, 45°C @ 10.8 bar, 70°C @ 3.4bar

Category:

Description

The MDPE elbow with male thread fitting is typically used to change the direction of an MDPE pipe by 90 degrees at a joint, with one end of the fitting having a male threaded connection.

The female threaded end of the MDPE elbow fitting is designed to be connected to a female threaded fitting, such as a valve or a tee, using PTFE tape or a thread sealant to ensure a watertight seal. The other end of the MDPE elbow fitting is designed to be connected to an MDPE pipe using a compression fitting.

Made from high-quality polypropylene material, this fitting is resistant to corrosion and impact damage, making it ideal for use in industrial, commercial, and residential applications.

Materials

Body
High-impact black Polypropylene, UV stabilized
with long-term heat ageing		 Nut
High impact Blue Polypropylene stabilized to UV ray exposition
Clinching Ring
Acetal resin (POM)		 Thrust Ring
High-impact black Polypropylene, UV stabilized with long-term heat ageing
Gasket
Black nitrile rubber (NBR)

Technical Specification

Product Code dxG (mm x Inch) D (mm) L (mm) I (mm) L1 (mm)
352120 20 x 1/2″ 47 71.5 61.5 43
352121 20 x 3/4″ 47 71.5 61.5 44
352122 25 x 1/2″ 54 81 42 50
352123 25 x 3/4″ 54 81 42 51.5
352124 25 x 1″ 54 81 42 53.5
352125 32 x 3/4″ 63.5 90 72.5 54
352126 32 x 1″ 63.5 90 72.5 56
352127 32 x 1 1/4″ 63.5 90 72.5 58
352128 40 x 1″ 76 107 87 63
352129 40 x 1 1/4″ 76 107 87 65
352130 40 x 1 1/2″ 76 107 87 66.5
352131 40 x 2″ 76 107 87 68
352132 50 x 1 1/4″ 91.5 123 97.5 72.5
352133 50 x 1 1/2″ 91.5 123 97.5 74.5
352134 50 x 2″ 91.5 123 97.5 74.5
352135 63 x 1 1/2″ 110.5 147 112.5 84
352136 63 x 2″ 110.5 147 112.5 84
352137 75 x 2 127.5 168 129 100
352138 90 x 3″ 150 201 153.5 114
MDPE Elbow 90 Male Threaded Technical Breakdown Drawing

Installation

  1. Insert a pipe liner into the pipe
  2. Loosen the retaining nut without removing it to ensure easy insertion
  3. Gently insert the pipe into the fitting making sure to push past the o-ring seal
  4. Tighten the nut by hand then finish with a strap wrench

Related products