Plastica Alfa MDPE Tee Flange Adaptor Fitting

Tee Flange Adaptor

Available in sizes 50mm to 110mm

Manufactured from high-quality materials

UK REG4 Compliant

Fully Recyclable

Eco friendly complying with LEED standard

Pressure rated to 16 bar

Operating Temperature: 20°C @ 16 bar, 45°C @ 10.8 bar, 70°C @ 3.4bar

Category:

Description

This type of adaptor is designed to connect an MDPE pipe to a flanged valve, pump, or other equipment. It consists of a flanged ring that is bolted onto the equipment and a compression fitting that is connected to the MDPE pipe. The compression fitting is inserted into the flanged ring and tightened using bolts, creating a secure and leak-proof connection.

Made from high-quality polypropylene material, this fitting is resistant to corrosion and impact damage, making it ideal for use in industrial, commercial, and residential applications.

Materials

Body
High-impact black Polypropylene, UV stabilized
with long-term heat ageing		 Nut
High impact Blue Polypropylene stabilized to UV ray exposition
Clinching Ring
Acetal resin (POM)		 Thrust Ring
High-impact black Polypropylene, UV stabilized with long-term heat ageing
Gasket
Black nitrile rubber (NBR)

Technical Specification

Product Code Size D (mm) L (mm) I (mm) L1 (mm) H (mm) d (mm) d1 (mm) F (mm)
360375 63 x 2″ 110.5 295 112.5 84 17.5 77 103 165
360377 75 x 3″ – – – – – – – –
360378 90 x 3″ 150 404 153.5 150 20 108 138 200
360379 90 x 4″ 150 404 153.5 140 24 131 158 220
360380 110 x 4″ 176.5 480 183.5 128 24 131 158 220

Installation

  1. Insert a pipe liner into the pipe
  2. Loosen the retaining nut without removing it to ensure easy insertion
  3. Gently insert the pipe into the fitting making sure to push past the o-ring seal
  4. Tighten the nut by hand then finish with a strap wrench

Related products