Ball Valve Male Thread

Ball Valve Male Thread

Available in sizes 20 – 63mm

Manufactured from high-quality materials

Eco friendly complying with LEED standard

Pressure rated to 16 bar

Operating Temperature: -15°C – 80°C

Category:

Description

An MDPE ball valve is used to control the flow rate of liquids and to connect two lengths of medium density polyethylene (MDPE) pipe together in a water distribution system. This ball valve features compression & male threaded ends.

Made from high-quality polypropylene material, this valve is resistant to corrosion and impact damage, making it ideal for use in industrial, commercial, and residential applications.

Materials

Body
High-impact black Polypropylene, UV stabilized
with long-term heat ageing		 Nut
High impact Blue Polypropylene stabilized to UV ray exposition
Clinching Ring
Acetal resin (POM)		 Thrust Ring
High-impact black Polypropylene, UV stabilized with long-term heat ageing
Gasket
Black nitrile rubber (NBR)

Technical Specification

Product Code Size (mm x inch) L (mm) L1 (mm) M (mm) H (mm) H1 (mm)
350736 20 x 1/2 126.5 84.5 85 51.5 48
350737 25 x 3/4 142 94 108 58 54
350738 32 x 1 158 104.5 108 70 63
350739 40 x 1 1/4 175 111.5 108 75 77
350740 50 x 1 1/2 202 135 150 101 91
350741 63 x 2 229 147 150 106 106

Installation

  1. Insert a pipe liner into the pipe
  2. Loosen the retaining nut without removing it to ensure easy insertion
  3. Gently insert the pipe into the fitting making sure to push past the o-ring seal
  4. Tighten the nut by hand then finish with a strap wrench
  5. Move the handle of the valve to the on/off position as required

Related products