Ball Valve

Ball Valve

Available in sizes 20 – 63mm

Manufactured from high-quality materials

Eco friendly complying with LEED standard

Pressure rated to 16 bar

Operating Temperature: -15°C – 80°C

Category:

Description

An MDPE compression ball valve is used to control the flow rate of liquids and to connect two lengths of medium density polyethylene (MDPE) pipe together in a water distribution system.

Made from high-quality polypropylene material, this valve is resistant to corrosion and impact damage, making it ideal for use in industrial, commercial, and residential applications.

Materials

Body
High-impact black Polypropylene, UV stabilized
with long-term heat ageing		 Nut
High impact Blue Polypropylene stabilized to UV ray exposition
Clinching Ring
Acetal resin (POM)		 Thrust Ring
High-impact black Polypropylene, UV stabilized with long-term heat ageing
Gasket
Black nitrile rubber (NBR)

Technical Specification

Product Code Size (mm) L (mm) L1 (mm) M (mm) H (mm) J1 (mm)
350724 20 156 68.5 85 51.5 48
350725 25 170 78 108 58 54
350726 32 200 92.5 108 70 63
350727 40 229 101 108 75 77
350728 50 251 117 150 101 91
350729 63 300 136 150 106 106

Installation

  1. Insert a pipe liner into the pipe
  2. Loosen the retaining nut without removing it to ensure easy insertion
  3. Gently insert the pipe into the fitting making sure to push past the o-ring seal
  4. Tighten the nut by hand then finish with a strap wrench
  5. Move the handle of the valve to the on/off position as required

Related products